Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 154

No. Page
M06 AUDIO-1
M07 AUDIO-2
154
Menu List
Item Settings
AUDIO OUT (F/R) CUE/EE
REC AUDIO OUT EE/SAVE
CAMERA ENABL/DSABL
ADAPTER
AUDIO CH3/4 CH1/2/SW
MODE
FRONT MIC REF –60 dB/–50 dB/–40
dB
REAR MIC REF –60 dB/–50 dB/–40
dB
REAR MIC +48V ENABL/DSABL
AU REC EMPHASIS OFF/ON
CUE REC OFF/ON
AU REF LEVEL –20 dB/–18 dB/–16
dB
AU REF OUT 0 dB/+4 dB/–3 dB
AU CH12 AGC MONO/STREO
MODE
AU CH34 AGC MONO/STREO
MODE
AU AGC SPEC –6/–9/–12/–15/–17
dB
AU LIMITER MODE OFF/–6/–9/–12/
–15/–17 dB
AU OUT LIMITER OFF/ON
Default Description
CUE Selects the audio output signal during FF/
REW.
CUE: cue audio signal
EE: Input signal
EE Selects the audio output signal during
recording.
EE: Input signal
SAVE: Not output
ENABL When a camera adaptor is connected, selects
whether or not to enable input of audio
channels 3 and 4 from the camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
SW Selects the sources to be recorded on
channels 3 and 4.
CH1/2: Same sources as channels 1 and 2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
–50 dB Sets the reference level of the front
microphone.
–60 dB Sets the reference level when the AUDIO IN
CH1 or CH2 connector is set to MIC.
ENABL Selects whether external power is supplied to
the external microphone when AUDIO IN
CH1 or CH2 connector is set to MIC.
OFF Turns the emphasis function on/off.
ON Turns cue audio recording on/off.
–20 dB Sets the audio reference input level.
0 dB Sets the output reference level.
MONO Selects the automatic adjustment mode of the
input levels of analog audio signals to be
recorded on channels 1 and 2; MONO (to
independently adjust channel 1 and 2) or
STREO (stereo mode).
MONO Selects the automatic adjustment mode of the
input levels of analog audio signals to be
recorded on channels 3 and 4; MONO (to
independently adjust channel 3 and 4) or
STREO (stereo mode).
–6 dB Sets the AGC characteristics (saturation
level).
OFF Sets the limiter characteristics (saturation
level) for high-level input signals in manual
adjustment of the audio input level.
ON Turns the audio output limiter on/off.