Sony HDW F900R - CineAlta Camcorder - 1080p Operation Manual page 71

3
When the CONTENTS page is displayed, push the
MENU knob once, and then turn the MENU knob to
b
move the mark to AUDIO-3, then push the MENU
knob again.
When any page of the MAINTENANCE menu is
displayed, turn the MENU knob until the AUDIO-3
page appears, then push the MENU knob.
The AUDIO-3 page appears.
4
Select the method to be used to adjust the audio input
level of audio channels CH-3 and CH-4.
To adjust the audio input level automatically
1 Turn the MENU knob to move the
channel to be adjusted automatically, then push the
MENU knob.
When adjusting the audio input level of
audio channel 3
2 Turn the MENU knob to display AUTO, then push
the MENU knob.
To adjust the audio input level manually
1 Turn the MENU knob to move the
channel to be adjusted manually, then push the
MENU knob.
When adjusting the audio input level of
audio channel 3
2 Turn the MENU knob to display MANU, then push
the MENU knob.
3 Turn the MENU knob to move the
CONTROL CH3, then push the MENU knob.
4 Turn the MENU knob until the audio level meter
5 Push the MENU knob.
b
mark to the
Adjust the audio input level of audio channel 4
similarly.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
b
mark to the
b
mark to LVL
shows up to -20 dB for a normal input volume.
Turn the MENU
knob until these 9
bars go on.
You can adjust the audio input level between 0 and
100. For normal input volume, 9 bars from the
bottom turn on. When the top bar (0 dB) turns on,
the audio input level is too high. When the second
bar from the top turns on occasionally, this is
allowed.
The audio input level of audio channel 3 is set to the
level adjusted in step 4.
71
Adjusting the Audio Level