Lenovo ThinkServer TD100 Deployment Manual page 77

Table 24. Notification parameter (continued)
Parameter
-repository <path>
-NoIcon
-IncludeRebootPackages 1,3,4
-NoReboot
-clearhistory
-clearsettings
Example:
tseu.exe /CM -search A -action INSTALL -IncludeRebootPackages 1,3,4
The following list provides a description of the search mode and notification
methods used:
v -search A - enables EasyUpdate to search for critical, recommended and optional
packages.
v -action INSTALL - installs the packages.
v -IncludeRebootPackages 1,3,4 - enables EasyUpdate to download and install
packages that require a reboot.
Notes:
1. If you do not include -IncludeRebootPackages 1,3,4; EasyUpdate will not detect
packages that require a reboot.
Description
If you use a repository folder to store update
packages, you must specify the folder's path.
To specify the folder's path, use this
parameter and EasyUpdate will search for
update packages stored in the folder you
specified.
Using this parameter will turn off the
balloon message that is displayed when
packages are found or installed with
EasyUpdate.
Enables EasyUpdate to install packages with
the specified reboot types. The reboot type
can be 1, 3, or 4 delimited by commas. The
following list provides the value for reboot
types supported by EasyUpdate:
v Type 1 - Reboot is forced by the package.
v Type 3 - Reboot is required for the
package to take effect. The software
distribution client will force a reboot after
all packages are installed.
v Type 4 - Power off is forced by the
package.
Enables EasyUpdate to prevent a reboot
after the system installs a package with
reboot Type 3. However, this parameter can
not suppress a reboot or shutdown when
packages have a reboot type of 1 or 4.
Enables you to control whether the history
and session folder are preserved or deleted
during and upgrade or over-install. The
default is to preserve the history and session
folder.
Enables you to control whether configurable
settings are preserved or deleted during an
upgrade or over-install. The default is to
preserve your settings.
Appendix A. Command line parameters
71