Lenovo ThinkServer TD100 Deployment Manual page 37

(english) easyupdate solution deployment guide
Hide thumbs Also See for ThinkServer TD100:
Table of Contents

Advertisement

Table 12. Computer Configuration>Administrative
Templates>ThinkServer>EasyUpdate>User Settings (continued)
Policy
Setting
Day Of The Week
Hour
TaskParameters
Mapped
UNC
Network
Drive
User
Password
UCSettings: This table provides the settings for the General policy of EasyUpdate.
Table 13. Computer Configuration>Administrative
Templates>ThinkServer>EasyUpdate>UCSettings>General
Policy
Setting
General
Disable
General
Extras Tab
v YES turns the
Extras Tab on.
v NO turns the
Extras Tab off.
This table provides the policy setting for the Update Thyself function of
EasyUpdate.
Description
Use this setting to set the day of the week for
when EasyUpdate will search for new updates.
Default: Monday
Use this setting to set the time of day for when
EasyUpdate will search for new updates. Valid
values: 0 - 23. Default: 0 and represents midnight
(12AM) while 23 represents 11PM.
The parameters to pass to the command that is
run for the scheduled EasyUpdate task. Default:
'/CM -search R -action LIST -scheduler' For more
information on command line parameters, see
Appendix A, "Command line parameters," on
page 63.
UNC location for the mapped network drive
(format \\server\share). Default: none
Use the mapdrv.exe /view command to create an
encrypted value for this field. Default: none.
Use mapdrv.exe /view command to create an
encrypted value for this field. Default: none
Description
This flag is used to determine if EasyUpdate should
ignore requests for EasyUpdate to be run. If this
flag is NO, EasyUpdate will run normally. If it is
YES, EasyUpdate will not run.
The Extras Tab enables you to easily find the right
software, hardware, and solutions to help you keep
your system up-to-date and performing to its fullest
capacity. EasyUpdate analyzes your system and
then recommends solutions that can be used to
enhance your system. When enabled, YES is default
value and will enable you to see the extra tab. You
can disable the Extras Tab by changing the value to
NO.
Chapter 3. Configurations
31

Advertisement

Table of Contents
loading

Table of Contents