Lenovo ThinkServer TD100 Deployment Manual page 15

List of parameters
The applications are packaged as self-extracting installation files. Therefore the
EasyUpdate installation file specifies the executable to start after the extraction. If
you use the -a parameter, then any parameter following the -a will be passed to
the installation file executable, and then prompts the execution to start after the
extraction.
c:\>[EasyUpdate installation file name].exe –s –fc:\tvt\tseut –a
[list of parameters]
The following table provides the values for the -a [list of parameters]:
Table 4. List of parameters with -a
Parameter
/s
/v
/L
Description
This parameter is used for
silent mode. It suppresses the
initialization window defined
in the installation file to
execute after the extract.
This parameter passes the
command line switches and
values of public properties to
the MSI file included in the
installation file. This
parameter is used to suppress
the MSI file user interface. You
would use this parameter in
conjunction with other
parameters and the executable
file that installation file will
start after the extraction when
you want to do a silent
installation. You can pass
information to the MSI file
using the command line to
execute the installation file. All
parameters within the double
quote symbols (" ") after the
/v parameter are passed to
the MSI file.
This parameter specifies the
language used by a
multi-language installation
program and requires a
decimal language ID (where
xxxx is a language ID code).
For the languages code, see
Table 1 on page 6.
Example
[EasyUpdate installation file
name].exe -s -a /s
[EasyUpdate installation file
name].exe -s -a /s /v" /qn"
[EasyUpdate installation file
name].exe -s -a /s /v" /qn"
/L1033
The above command line will
use English.
Chapter 2. Installation
9