Lenovo ThinkServer TD100 Deployment Manual page 39

Computer Configuration\Administrative Templates\ThinkServer
\EasyUpdate\User Settings\General\Repository Location
10. Double-click Repository Location.
11. In the Local Repository Location 1 field, change the value from
SUPPORTCENTER to your network repository share, for example:
\\Server_X\TSEU_repository\
12. Click Apply.
Note: To push policy settings immediately after you configure the settings for
the ADM file, complete the following steps:
a. From the Windows Start menu, click Run.
b. Type gpedit.msc /force and then click OK.
Setting policies for multiple repositories: Use the following example to set the
policies in Group Policy when using multiple repositories:
1. After adding the Administrative Template for EasyUpdate, navigate Group
Policy Object Editor to the following location:
Computer Configuration\Administrative Templates\ThinkServer
\EasyUpdate\User Settings\General\Repository Location
2. Double-click Repository Location.
3. In the Local Repository 2 field, type the file path for your local system
repository, for example:
%ANYDRV%\EasyUpdate1_x\
4. In the Local Repository 3 field, type the network share repository path of your
server and share, for example:
\\Server_X\TSEU_repository\
5. Click Apply.
EasyUpdate version control using Active Directory
If you want to control the version of EasyUpdate available to your users, you can
use your network repository to store specific versions of EasyUpdate. Storing
packages locally will enable the EasyUpdate application to search for upgrades
within your network repository. To configure Active Directory for EasyUpdate
version control, complete the following steps:
1. Download the SSClientCommon.zip file from the following Lenovo Support
Web site:
http://www.lenovo.com/support/easyupdate
2. Extract the SSClientCommon.zip file to your repository folder.
3. After adding the Administrative Template for EasyUpdate, navigate the Group
Policy Object Editor to the following location:
Computer Configuration\Administrative Templates\ThinkServer
\EasyUpdate\UCSettings\HTTPSHelloSettings
4. Double-click Update Thyself.
5. Click Enabled.
6. In the Update Thyself text box, type the UNC path of your repository. For
example:
\\Server_X\TSEU_repository\
Note: If your repository folder requires authentication, set the polices for the
Mapped Network Drive. For information about Mapped Network Drive
policies, see "Group Policy settings" on page 28.
Chapter 3. Configurations
33