Lenovo ThinkServer TD100 Deployment Manual page 36

30
EasyUpdate Solution Deployment Guide
Table 12. Computer Configuration>Administrative
Templates>ThinkServer>EasyUpdate>User Settings (continued)
Policy Setting
IgnoreRMLicCRCSize
NotifyInterval
Scheduler Scheduler Ability
Scheduler Lock
Scheduled Mode
Day Of The Month
Description
Use this setting to enable or disable the following
functions when EasyUpdatee downloads packages
from the Lenovo Help Center Web site:
CRC - checks for file corruption of readme files
v
and License agreements when you download
packages from the Lenovo Help Center Web
site.
v File size - checks for the file size of readme and
license agreement files.
Set the value to YES and EasyUpdate ignores
these files and does not check for size or
corruption.
Set the value to NO and EasyUpdate checks for
file size and corruption.
Note: EasyUpdate does not check file size and
corruption of readme files and license agreement
files when you download packages from a local
repository even if you set this value to NO.
If this value is set at the default of 300 seconds,
then you are prompted with a restart notification
every 300 seconds when you begin to download
and install a package that forces a reboot and
defer the download and installation process.
EasyUpdate uses the default value when invalid
settings are used. For example, if you set the
value to anything over 86,400 seconds (24 hours),
EasyUpdate uses the default value of 300 seconds.
You can change the time interval value from 60
seconds up to 86,400 seconds (24 hours).
Turns the EasyUpdate scheduler on or off:
v YES sets EasyUpdate to run on the schedule
specified.
v NO sets EasyUpdate to not run on a schedule.
Determines whether the 'Schedule updates' option
is available in the EasyUpdate user interface:
v SHOW makes the item visible and active.
v HIDE removes the item from the interface.
v DISABLE makes the item visible, but disables it
(the item is greyed-out).
Determines the type of packages on which
EasyUpdate takes action:
v When this value is set to Monthly, EasyUpdate
will search updates on the day of 'Day Of The
Week'.
v When set to Weekly, EasyUpdate will search on
the day of 'Day Of The Month'.
Use this setting to set the day of the month for
when EasyUpdate will search for new updates.
Default: 1