Lenovo ThinkServer TD100 Deployment Manual page 27

Table 10. User Settings\General (continued)
Configurable item
RepositoryLocation1
UNCMaxAttempts
Example:
\GENERAL
\CheckLocalCRC = YES
\DebugEnable = NO
\DisplayInformationScreen = YES
\DisplayLicenseNotice = YES
\DisplayLicenseNoticeSU = YES
\ExtrasTab = NO
\IgnoreLocalLicense = NO
\IgnoreRMLicCRCSize = NO
\NotifyInterval = 300
\RepositoryLocation1= SUPPORTCENTER
\UNCMaxAttempts = 2
User Settings\Scheduler
Using the scheduler function, you can configure EasyUpdate to search for update
packages at designated intervals. To improve download speeds of packages from
the Lenovo servers, change the RunOn setting to a day that fits the needs of your
enterprise. Do this when you install EasyUpdate.
The default values and settings for the EasyUpdate scheduler are provided in the
following table:
Description Value
Use this setting Default value:
to indicate the SUPPORTCENTER
repository folder
path. The key
value name
should be
Possible values:
"Repository
v SUPPORTCENTER
Location%N%",
where %N% is a v A folder path
number between
(include) 1 and
20.
Use this setting Default value: 2
to indicate the
maximum
number that of
tries that
EasyUpdate will
Possible values: Any
attempt when
valid integer
connecting to a
network share
folder before it
fails.
Action
EasyUpdate will
search for update
packages in the
folder specified in
this value.
EasyUpdate will
attempt the number
of tries set in this
value when
connecting to a
network share folder.
Chapter 3. Configurations
21