Ddns; System - Digimerge Touch DH200 Series Instruction Manual

DDNS

Figure 38.2 DDNS options
To configure DDNS options:
1. Under USE, select DEFAULT.
2. Under DOMAIN NAME, enter your
Digimerge DDNS domain name from the
confirmation email.
3. Under USER ID, enter your
.
user name/ID
4. Under PASSWORD, enter your Digimerge
DDNS password.
5. Click APPLY and then OK to save your
settings and close the window.

SYSTEM

Figure 39.0 System options—General
To configure general system options:
1. Select the GENERAL TAB (default) and
Digimerge DDNS
2. Click APPLY and then OK to save your
configure the following:
• AUTO KEY LOCK: Select ON/OFF. If ON,
the front panel touch-screen will be
disabled after 3 minutes of inactivity. Enter
your system password (by default, 000000)
to disable
• KEY TONE: Select ON/OFF. If ON (default),
the system will "beep" whenever a button
is pressed on the front panel or remote
control
• OVERWRITE: Select ON/OFF. If ON, the
system will overwrite the earliest
recorded video on the hard disk when the
HDD is full
• RESOLUTION: From the drop-down menu
select CIF 4CH, FIELD 4CH, FRAME 4CH,
CIF 8CH, FIELD 8CH, FRAME 8CH, or CIF
+ FRAME.
NOTE: Recording must be stopped on the DVR
in order to change the resolution.
NOTE: Resolution may vary by model.
settings and close the window.
Remote Setup
65