Configuring A Virtual Dvr - Digimerge Touch DH200 Series Instruction Manual

Configuring a Virtual DVR

Once you have created a Virtual DVR, you can register DVRs and cameras to that Virtual DVR.
To configure a Virtual DVR:
1. From Live viewing, double-click a Virtual DVR icon from the Virtual DVR Indicator at the
bottom of the main screen. The
appears on the main screen.
Figure 30.2 Virtual DVR Indicator
2. Use the Split-screen selector in the right of the main screen to a select a split-screen mode.
3. Drag a DVR from the DVR Indicator to a desired location on the screen.
4. Add DVRs to the Virtual DVR:
• Click and drag a DVR from the DVR Indicator to a desired channel on the screen
NOTE: Cameras will be added in numerical order from the selected channel to the end, depending on
the number of cameras connected to the DVR
OR
4. Add cameras to the Virtual DVR:
• Select a DVR from the DVR indicator
• Drag specific cameras to a desired channel on the screen
Figure 30.3 Add a DVR—DVR1 (4CH DVR) is added to channel 4 on the screen
DVR1
DVR1
DVR1
CH 2
CH 1
CH 3
DVR1
CH 4
Figure 30.4 Add a Camera—CH 1 from DVR 2 is added to channel 8 on the screen
NOTE: The newly selected camera will replace the existing camera if there is a conflict.
indicator appears on the icon and a blank split-screen
DVR1
DVR1
CH 2
CH 1
DVR1
CH 4
DVR1
DVR1
CH 1
CH 2
DVR2
DVR1
CH 1
CH 4
DVR1
CH 3
DVR1
CH 3
Virtual DVR
57