Miscellaneous Problems - Oki C5300n User Manual

Miscellaneous problems

The power is on, but the printer does not go online.
Possible cause
Bad connection
Print processing does not start.
Possible cause
Printer error
Print processing cancels.
Possible cause
The printer interface
cable is faulty.
The time out setting is
too short.
Printer makes a strange noise.
Possible cause
The printer is not
horizontal.
There are scraps of
paper or other foreign
matter inside the printer.
The top cover is not
firmly shut.
Remedy
Switch off the printer and disconnect the power
cable. Reconnect the power cable and switch the
printer on. If this does not clear the fault, call for
service.
Remedy
Check the control panel. If an error message is
displayed, correct the problem.
Remedy
Replace the printer interface cable.
Reset time out in the menu to a higher value
(
SYS CONFIG MENU
Remedy
Place the printer on a stable, level surface.
Check the inside of the printer and remove any
such objects.
Press the left and right sides of the top cover.
C5300 Troubleshooting • 193
→
WAIT TIMEOUT
).