MISCELLANEOUS PROBLEMS
The power is on, but the printer does not go online.
Possible cause
Bad connection
Print processing does not start.
Possible cause
Printer error
Print processing cancels.
Possible cause
The printer interface
cable is faulty.
The time out setting is
too short.
Printer makes a strange noise.
Possible cause
The printer is not
horizontal.
There are scraps of
paper or other foreign
matter inside the
printer.
Remedy
Switch off the printer and disconnect the power
cable. Reconnect power cable and switch
printer on. If this does not clear the fault, call
for service.
Remedy
Check the control panel. If an error message is
displayed, correct the problem.
Remedy
Replace the printer interface cable.
Reset time out to a higher value.
Remedy
Place the printer on a stable, level surface.
Check the inside of the printer and remove any
such objects.
180 > C7100/C7300/C7500 Troubleshooting