Maintenance Menu - Oki C5300n User Manual

Note: Factory default settings are shown in bold.
Item
HEX DUMP
Note: Factory default settings are shown in bold.
Item
MENU RESET
SAVE MENU
POWER SAVE
PAPER BLACK
SET
PAPER COLOR
SET
TRANSPR
BLACK SET
System Adjust Menu (cont.)
Settings
[EXECUTE]

Maintenance Menu

Settings
EXECUTE
EXECUTE
ENABLE
DISABLE
–2 to +2 in
increments of 1
Default = 0
–2 to +2 in
increments of 1
Default = 0
–2 to +2 in
increments of 1
Default = 0
C5300 Menu Functions • 123
Explanation
Press ENTER to switch the
printer to the Hexadecimal
Dump mode in which all data
received is printed in both
Hexadecimal and ASCII
format. To return to normal
print mode, switch the printer
off then on again.
Explanation
Resets menus to the default settings.
Saves current menu settings as default
values. At confirmation prompt, press
ENTER to confirm save, or CANCEL.
Change this setting to Disable if you do
not want the printer to enter the power
save mode after the specified time.
Used for small adjustment when you
experience faded print or light specks /
streaking in monochrome printing on
white paper. Select a higher value to
reduce fading, or a lower value to reduce
specks or streaking in high density print
areas.
As above, but for color printing.
As above, but for mono printing on
transparencies.