System fans
Removing and replacing the system fans
The front system fan is mounted on the front of the bottom drive cage. The
rear system fan is mounted on a fan mounting bracket attached to the rear
of the system.
To remove the front system fan:
1
Turn off the system and disconnect the power cord and modem cord, if
installed.
2
Open the case by following the instructions on page 17. (See "Preventing
static electricity" on page 15.)
3
Remove the bezel, as described in "To remove the bezel:" on page 19.
4
Disconnect the front fan power cable from the system board.
5
Remove the power and data cables from any hard drives mounted in the
bottom drive cage.
6
Remove the drives from the bottom drive cage and place them in
anti-static bags or containers.
55
System fans