Sending A Fax From The Control Panel - Epson WorkForce C362B Quick Manual

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.
Note:
In Windows, you can send a fax from your computer using the Epson FAX Utility, see
page 29 for details.
1. Place your original(s) for faxing (see page 17).
2. Press the K
3. Use the numeric keypad to manually enter the fax
number. You can enter up to 64 digits.
Note:
To dial the number using your telephone, by redialing, or by selecting from your
speed dial list, see page 29.
4. To change the resolution, contrast, or transmission settings, press x
and select settings as necessary.
5. Press the x
Note:
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
If you are scanning with the Automatic Document Feeder, your
■
document is automatically scanned and faxed.
If you placed your document on the scanner glass, you see this screen after
■
the first page is scanned:
If you need to fax additional pages, place your original on the scanner
glass or in the Automatic Document Feeder. Then press
you do not need to fax another page, press
If the fax number is busy, you see a redialing message and the WorkForce
■
310 Series redials after one minute. To redial immediately, press
Redial/Pause
To cancel faxing, press y
28
Faxing a Document
button.
Fax
or x
B&W Color
.
Stop/Clear Settings
button to send your fax.
2
at any time.
to continue. If
1
. Your document is faxed.
Menu