Sending A Fax From The Control Panel - Epson WorkForce WF-2540 Quick Manual

5. Press u or d or use the numeric keypad to select the number of rings, then press
Select more rings than you use for the answering machine.
6. Press x
Menu

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial list, see the next section. To send a fax from your computer using the Epson
FAX Utility, see your online User's Guide.
1. Press the K
2. Place your original(s) for faxing (see page 6).
3. Use the numeric keypad to enter the fax number (see "Using the Keypad to Enter
Numbers and Characters" on page 19). You can enter up to 64 digits.
4. To change fax settings, press x
done, press x
5. Press the
B&W
where you placed your document (ADF or scanner glass).
Note: If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
■
If you are scanning with the ADF, your document is automatically scanned and
faxed.
■
If you place your document on the scanner glass, you can scan additional pages
after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
To cancel faxing, press y
20
Sending a Fax From the Control Panel
to exit the Fax Menu.
button.
Fax
again.
Menu
or
Color Start
x
Stop/Reset
and select settings as necessary. When you're
Menu
button to send your fax. If you are prompted, select
at any time.
.
Redial/Pause
.
OK