Sending A Fax From The Control Panel - Epson XP-800 Quick Manual

Entering Your Phone Number
1. Select
Your Phone Number
2. Use the keypad to enter your phone number, up to 20
digits. You don't need to use dashes.
■
To delete a character, press
■
To type the + symbol for an international
number, press #.
3. Press
Done
Selecting the Number of Rings to Answer
If you connected an answering machine and it is set to pick up on the fourth ring, you
should set the product to pick up on the fifth ring or later. Otherwise, your answering
machine will not be able to pick up incoming calls.
1. Press
2. Scroll down and select
3. Select
Communication
+
4. Press or
Note: Set the fax to answer one ring after the answering machine.

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.
Note: To dial the number using a telephone, by redialing, or by selecting from your
speed dial or group dial list, see the next section. To send a fax from your computer
using the EPSON FAX Utility, see your online User's Guide.
1. Place your original(s) for faxing (see page 10).
2. Press
To fax a two-sided document, place your document
in the ADF. Scroll down on the fax screen and select
2-sided Faxing
3. Press
Enter Fax Number
keypad to enter the fax number (up to 64 digits).
Then press
22
Faxing a Document
to return to the Header menu.
if necessary, then press l or r to select
Fax Settings
, then
–
to select the number of rings, then press
if necessary, then select
, then select
On
, then use the numeric
.
Done
from the Header menu.
.
Setup
.
.
Rings to Answer
.
Fax
.
.
.
Done