Setting Up Fax Features - Epson WorkForce C362B Quick Manual

Setting Up Fax Features

Before sending faxes, you should create a fax header and select your fax
preferences.
Note:
To change other settings, print fax reports, or set up fax features using the Epson FAX
Utility (Windows only), see the on-screen Epson Information Center.
Entering Fax Header Information
You should enter your name and phone number in the fax header before sending
faxes so that recipients can identify the origin of the fax.
Note:
If you leave the WorkForce 310 Series unplugged for a long period of time, the date and
time settings may get lost. See the Start Here sheet or on-screen Epson Information
Center for instructions on setting the date and time.
Entering Your Sender Name
1. Press the K
2. Press u or d to select
press
OK
3. Press u or d to select
4. Press u or d to select
press
OK
5. Use the numeric keypad to enter your sender name or other header
information (see page 25). You can enter up to 40 digits.
6. When you're done, press
24
Faxing a Document
button, then press x
Fax
Fax Setting
.
Header
Fax Header
.
OK
.
Menu
, then
, then press .
OK
, then
to return to the Fax Header screen.