Table A.2 Recommended Racks For Mounting; Table A.3 Primequest 1000 Series External Dimensions; Table A.4 Rack Mounting Requirements - Fujitsu PRIMEQUEST 1000 Series Hardware Installation Manual

PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX A Racks

TABLE A.2 Recommended racks for mounting

Fujitsu 19-inch rack
Model 2742
Model 2737
Model 2724
Model 2642
Model 2624
Model 2616
Model 1740
Model 1640
Model 1624

TABLE A.3 PRIMEQUEST 1000 series external dimensions*

Model
PRIMEQUEST 1800E2/1800E
* The external dimensions do not include protrusions.
Note
The Fujitsu 19-inch rack comes with a blank panel covering the front of each empty space that has no mounted
device.
If warm exhaust air from the device circulates to the front of the rack and reenters the device, it may cause a
temperature alarm and lead to a device failure.
Be sure to use the blank panel to cover the front of an empty space that has no mounted device.
Rack mounting requirements
The following table lists the requirements for mounting in one rack.

TABLE A.4 Rack mounting requirements

Model
PRIMEQUEST 1800E2/1800E
PCI_Box
Depth (mm)
1050
1050
1050
1050
1050
1050
1050
1050
1050
Height
530 mm 440 mm
(12U) (Panel included:
482 mm)
Number of
mountable units
Up to 2 units The bottom of the mounted device
must not be below 1U.
The top of the mounted device must
not be above the upper limit (26U).
(*)
No mounting requirements (*)
52
Open area ratio
80%
80%
80%
80%
80%
75%
80%
80%
80%
Width Depth
800 mm
Mounting area
C122-H004-07EN