Elevator Load Conditions; Table 3.1 Elevator Load Conditions - Fujitsu PRIMEQUEST 1000 Series Hardware Installation Manual

PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 3 Notes on Carrying In and Installing the Product
3.1

Elevator Load Conditions

The rack with the device mounted is wider than the average computer. Therefore, to use an elevator to carry in the
rack, the rack may need the side boards or doors removed before loading on the elevator. When using an elevator
to carry in the rack, see the elevator load conditions in
are properly loading the rack on the elevator.

TABLE 3.1 Elevator load conditions

Elevator code Load
capacity
[kg]
P-6-C0 450
P-9-C0 600
P-11-C0 750
P-13-C0 900
P-15-C0 1000
P-17-C0 1150
P-20-C0 1350
P-24-C0 1600
*1 Interior dimensions of the cab [mm]
*2 Door opening dimensions [mm]
Width Depth Height
(*1) (*1) (*1)
1400 850 2300
1400 1100 2300
1400 1350 2300
1600 1350 2300
1600 1500 2300
1800 1300
1800 1500 2300
2000 1350
1800 1700 2300
2000 1500
2000 1750 2300
2150 1600
TABLE 3.1 Elevator load conditions
Width Height
(*2) (*2)
800 2100
800 2100
800 2100
900 2100
900 2100
1000
1000 2100
1100
1000 2100
1100
1100 2100
44
and confirm that you
Rack
Models 2742/2737/2724/
2642/2624/2616
Models 1740/1640/1624
Cannot be loaded
Cannot be loaded
Can be loaded
Can be loaded
Can be loaded
Can be loaded
Can be loaded
Can be loaded
C122-H004-07EN