Reset Menu - Epson AcuLaser CX11NF Basic Manual

Item
LCD Contrast
Time Setting
(CX11NF only)
Date Format
(CX11NF only)

Reset Menu

This menu lets you cancel printing and reset the printer settings.
Item
Clear Warning
Clear All Warnings
Reset
Restart Unit
Factory Settings
Change toner C/M/Y/K
Reset Fuser Counter
74
Using the Control Panel
Settings
0 to 15
MM/DD/YY, HH/MM
DD/MM/YY, MM/DD/YY,
YY/MM/DD
Description
Clears every warning message, except for consumable
products or mandatory-replacement parts.
Clears all warning messages that appear on the LCD screen.
Stops printing and clears the current job. You may want to
reset when there is a problem with a print job and you cannot
print.
Restarts the printer.
Restores the printer settings to their original factory settings.
Moves the selected toner cartridge into position so that it can
be replaced. See page 83.
Resets the fuser unit service life counter after you have
replaced the fuser unit.
Description
Adjusts the contrast of the LCD screen. Use
the u and d buttons or the numeric keypad to
set the contrast between 0 (lowest contrast)
and 15 (highest contrast.)
Specifies the date and time used in fax
communications. The letters MM, DD, YY,
HH, and MM indicate the Month, Date, Year,
Hour, and Minute respectively. To specify the
date and time use the u and d buttons, or
numeric keypad.
Specifies the display format for the Time
Setting. The letters DD, MM, and YY indicate
the Date, Month, and Year respectively.