Usb Menu; Network Menu - Epson AcuLaser CX11NF Basic Manual

USB Menu

These settings control communication between the CX11N and the computer when
they are connected using a USB interface. Some items may not appear unless
corresponding devices are installed.
Item
USB I/F
USB Speed
After these settings are changed, the new settings don't take effect until after a reset or
after the power is turned off and on again, even though it is shown on the Status
Sheet.

Network Menu

These settings control communication with the CX11N when it is connected to a
computer network.
Item
Network I/F
Network Config
Get IPAddress
IP (IP address)*
SM (Subnet mask)
GW (Gateway address)
AppleTalk
MS Network
Rendezvous
Link Speed
* When the Get IPAddress is changed from Panel or PING to Auto, the panel setting values are
saved. The saved setting values are displayed on the network status sheet. 192.168.192.168 if
the settings are not made from the panel.
Settings
On, Off
HS, FS
Settings
On, Off
No, Yes
If Yes is selected then Get IPAddress, IP, SM GW,
Appletalk, MS Network, Rendezvous, and Link Speed appear
as available settings in the Network menu.
Panel, Auto, PING
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
On, Off
On, Off
On, Off
Auto, 100 Full, 100 Half, 10 Full, 10 Half
Accessing the Setup Menu
75