Selecting Your Paper Source; Selecting A Paper Tray - Epson AcuLaser CX11NF Basic Manual

Selecting Your Paper Source

You can specify a paper source manually or set up automatic paper source detection
(recommended).
■
To manually select a paper source for Windows, access the printer driver
properties, click the
want to use from the Paper Source list. Then click
■
To manually select a paper source for Macintosh
Printer Settings
Then select the paper source that you want to use from the Paper Source list and
click
OK
■
To set up automatic paper source detect, select
Source list as described above. The product will search for a paper source
containing the specified paper size in the MP tray. If the optional 500-Sheet Paper
Cassette Unit is installed, then it will also search its cassette.
Note:
If you select paper size or paper source settings in your application, these settings may
override the printer driver settings.

Selecting a Paper Tray

Before you load paper you need to select a paper tray based on whether you're
printing or copying and the size of paper you're printing or copying onto.
The available paper types for copying are not the same as those for printing.
Depending on the paper source, available paper types differ. When copying, you can
only use the following paper types:
Paper source
MP tray
Optional paper cassette
12
Handling Paper and Originals
Basic Settings
from the drop-down list, and click the
. (For details, see page 23.)
Paper type
Plain paper, Semi-thick, Letterhead, Recycled paper,
Colored paper, Transparencies, Labels, Extra thick, Coated
Plain paper, Letterhead, Recycled paper, Colored paper
tab, and select the paper source that you
. (For details see page 19.)
OK
®
, access the printer driver, select
Auto Selection
tab.
Basic Settings
from the Paper