Device Properties Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

8.3.6 Device Properties Submenu

Configures devices connected to SCSI adapters.
LSI Logic MPT SCSI Setup Utility
Device Properties
SCSI Device
Restore
ID Identifer
Defaults
0 -
<Defaults>
1
<Defaults>
2
<Defaults>
3 <Defaults>
4 <Defaults>
5 <Defaults>
6
<Defaults>
7 1020/1030
<Defaults>
8 SDR CEM318
<Defaults>
9
<Defaults>
10
<Defaults>
11
<Defaults>
12 <Defaults>
13 <Defaults>
14 <Defaults>
15
<Defaults>
Esc=Abort/Exit
Item
Restore Defaults
MT/Sec
MB/Sec
Data Width
Scan ID
Scan LUNs>0
Disconnect
SCSI Timeout
Queue Tags
Version MPTBIOS-IMx.xx.xx
Mt/Sec MB/Sec Data Scan
Width ID
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
[160] 320 [16] [Yes]
ArrowKeys=Select Item
Home/End=Select Item
table: Items on the Device Properties Submenu
Setting
-
• 0
• 5
• 10
• 20
• 40
• 80
• 160 (at the time of
purchase)
-
16 (Fixed parameter)
• Yes (at the time of
purchase)
• No
Yes (Fixed parameter)
On (Fixed parameter)
10 (Fixed parameter)
On (Fixed parameter)
PRIMERGY RX200 S2 User's Guide
Scan Dis- SCSI Queue
LUNs>0 connect TimeOut Tags
[Yes] [On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes]
[On] < 10> [On]
[Yes] [On] < 10> [On]
[Yes] [On] < 10> [On]
-/+=Change[Item]
Enter=Execute<Item>
Description
The server does not support this.
Sets the maximum transfer rate the host adapter
supports.
Displays the maximum transfer speed the host
adapter supports.
Sets the maximum transfer width the host adapter
supports.
Sets whether or not to scan devices.
Sets whether or not to scan LUNs.
Sets whether or not the host adapter disconnects
SCSI devices from the SCSI bus.
Sets the SCSI timeout time (seconds).
Sets whether or not to support tagged command
queues.
8
241