Installable Power Supply Unit; How To Install A Power Supply Unit - Fujitsu PRIMERGY RX200 S2 User Manual

7.8.2 Installable Power Supply Unit

The following power supply unit can be installed on this server.
Product name
Power Supply Module

7.8.3 How to Install a Power Supply Unit

This section explains how to install a power supply unit.
1
Turn off the server and peripheral devices ( "1.4.3 Turning Off the Server"
(pg.32)). Unplug the power cable for the optional power supply unit from the
rear of the server.
2
Remove the power cable from the power supply unit in the front.
[Front]
Power cable
3
Remove the dummy unit while pressing the green lever.
Hold the handle on the dummy unit and pull it out.
Dummy unit
Handle
table: List of Installable Power Supply Units
Model
PG-PU116
• Areas around the power supply unit may be very hot. Turn off the power and
wait for a while before starting work.
Green lever
PRIMERGY RX200 S2 User's Guide
Remarks
7
197