System Event Log; How To Use Server Management Tools - Fujitsu PRIMERGY RX200 S2 User Manual

9.3 System Event Log

To operate system event log, use Server Management Tools.

9.3.1 How to Use Server Management Tools

This section explains how to use Server Management Tools.
Server Management Tools can operate event logs stored in the Baseboard Management Controller
(BMC: a micro-controller on the baseboard that manages temperature and voltage sensors).
Server Management Tools has the following functions.
• Viewing the System Event Log
• Saving the system event log
• Deleting the system event log
When an error log occurs, save the log using Server Management Tools and contact your sales
representative or an office listed in the "Contact Information" of the "Start Guide".
The Server Management Tools disk supplied with this server is exclusively for this server. Do not use
those tools on other systems. If it is used, the system can be damaged.
Run Server Management Tools when the server is operating. Refer to "
Management Tools" ( pg.267). Do not run this tool on the server started from the hard disk drive or
other floppy disks. Otherwise, the system may be corrupted.
Do not eject the floppy disk when the floppy disk access LED is on. Doing so may destroy the data on
the floppy disk.
■ Starting Server Management Tools
Before starting the system from the "Server Management Tools" disk, check to see that the "OS Boot
Monitoring" function of ServerView is disabled (default setting).
If the system is started with this function enabled, the server may automatically turn off or restart
improperly.
If the "OS Boot Monitoring" function is needed, it should be reset to enabled before resuming normal
server operation. For details of ServerView, refer to "ServerView User's Guide".
PRIMERGY RX200 S2 User's Guide
■
Starting Server
9
267