Memory Status Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.14 Memory Status Submenu

Appears when [Memory Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed memory.
ChannelA
DIMM A1:
DIMM A2:
DIMM A3:
DIMM A4:
ChannelB
DIMM B1:
DIMM B2:
DIMM B3:
DIMM B4:
F1 Info
Esc Exit
Item
DIMM A1
DIMM A2
DIMM A3
DIMM A4
DIMM B1
DIMM B2
DIMM B3
DIMM B4
228
PhoenixBIOS Setup Utility
Server
Memory Status
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the Memory Status Submenu
Setting
• Enabled (at the time of
purchase)
• Disabled
• Failed
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Sub-Menu
Description
Sets whether or not to allow the use of memory in
Memory Slots A1 to B4.
For memory slot locations, refer to "7.4.1 Where to
Install the Memory Modules" ( pg.175).
This must not be set to [Disabled] or [Failed].