Changed Settings - Muratec MFX-C3035 User Manual

Changed settings

For increased security, the following settings are set when enhanced security
settings are applied.
A changed setting cannot be changed when [Enhanced Security
Mode] is set to [OFF].
If password rules have been applied, a password that does not meet
the conditions of the password rules is considered a failed attempt
during authentication.
Administrator mode parameters
[Security Settings] - [Security Details]
- [Password Rules]
[Security] tab in Web Connection -
[Authentication Setting] - [General
Settings] - [Public Access]
[Security] tab in Web Connection -
[PKI Settings] - [SSL/TLS Settings] -
[SSL/TLS]
[Security] tab in Web Connection -
[PKI Settings] - [SSL/TLS Settings] -
[Encryption Strength]
[Network] tab in Web Connection -
[E-mail Settings] -
[S/MIME] - [E-mail Text Encryption
Method]
[Network] tab in Web Connection -
[FTP Settings] - [FTP Server Settings]
- [FTP Server]
[Network] tab in Web Connection -
[SNMP Settings] - [SNMP v1/v2c Set-
tings] - [Write]
[Network] tab in Web Connection -
[SNMP Settings] - [SNMP v3 Set-
tings] - [Write User Name] - [Security
Level], [auth-password] and
[priv-password]
[Security Settings] - [Security Details]
- [Registering and Changing Addr.]
*1
Set to [AES/3DES] when [Enhanced Security Mode] is set to [OFF].
3-76
Changed settings
Set to [ON].
Set to [Restrict].
Set to [Enable].
Set to [AES-256] or [AES-256,
*1
3DES-168].
Set to [3DES], [AES-128], [AES-192]
*1
or [AES-256].
Set to [Disable].
Set to [Disable].
Set to [Auth-password/Priv-pass-
word].
Set to [Restrict].
[Admin Settings]