Muratec MFX-C3035 User Manual page 347

Message
[Memory Full (Scan)]
[Insufficient memory.]
[The job is cancelled.]
[HDD Capacity Over]
[Insufficient HDD capacity.]
[Delete unnecessary file.]
[The job is cancelled.]
[Document Registration
Limit Over]
[Saved documents in folder
reached limit.]
[The job is cancelled.]
[Connection Failed]
[Check if the destination is
correct.]
[The job is cancelled.]
[Error Occurred during
Writing]
[Check whether it is
write-protected or out of
space.]
[Scan TX Failed]
[Scan TX failed.]
[Job is cancelled.]
[Counter reached its
limit.]
[The counter has reached
its maximum allowance.]
[Please delete the job.]
13-44
Cause
The memory capacity
is insufficient.
Otherwise, the SSD
storage area is
insufficient.
There is not enough
space available on the
hard disk.
The number of image
files on the hard disk
has reached the
maximum possible.
The machine failed to
connect to the FTP
server.
The machine failed to
write data to the USB
memory device.
The scan transmission
failed. (Does not
appear with a
broadcast
transmission.)
The counter has
reached the upper
limit.
Status, error and service messages
Solution
Cancel the job.
Delete any unneces-
sary files.
Cancel the job.
Cancel the job.
Wait a while. The error
is canceled.
Cancel the job.
Wait a while. The error
is canceled.
Delete the job.