Specifying Communication Settings; [Url Notification]; [Url Notification Address]; Specifying Destinations - Muratec MFX-C3035 User Manual

Specifying communication settings

The [Communication] parameters available from the [Settings] screen can be
used to specify settings for sending job completion notifications by E-mail.

[URL Notification]

Description
Settings
Specify whether or not notifications of completion of a job are
to be sent by E-mail.

[URL Notification Address]

Description
Specify the E-mail address where notifications of completion of
a job are to be sent.

Specifying destinations

Use any of the following methods to specify destinations.
"Selecting from registered destinations" on page 10-26
"Directly typing in the address" on page 10-28
"Selecting from the log" on page 10-31

Selecting from registered destinations

An address book destination or group destination can be selected from those
previously registered on the machine.
In order to select a registered destination, address book destinations
and group destinations must first be registered on the machine. For
details, refer to "Registering destinations" on page 10-33.
In [User Settings] - [Machine Settings] - [Scan to Folder Default Tab],
you can specify the default destination tab in the Scan to Folder mode
screen. For details, refer to "[Machine Settings]" on page 3-13.
10-26
[ON] / [OFF]
Specifying destinations