Muratec MFX-C3035 User Manual page 332

Symptom
Booklet Left
and Right
Binding out-
put is incor-
rect.
You hear
unusual
noises.
Some areas
of the
scanned
image are
missing.
The
web-based
utility cannot
be accessed.
Media is
wrinkled.
Solving Other Problems
Cause
Both the printer driver
and the application
have been set for col-
lation.
The machine is not
level.
The tray is not
installed correctly.
There is a foreign
object stuck inside
the machine.
Acrobat 8 (Macintosh
version) is used for
scanning the image.
The Web Connection
Administrator's pass-
word is incorrect.
The media is moist
from humidity or hav-
ing water spilled on it.
The media feed roller
or fuser unit is defec-
tive.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Solution
For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the printer driver's Basic Tab. Do not
set collation in the application.
Place the machine on a flat, hard, level
surface.
Remove the tray that you are printing
from and reinsert it completely into the
machine.
Turn off the machine and remove the
object. If you cannot remove it, contact
Technical Support.
With the Acrobat Scan setting, turn off
the OCR and Filtering functions.
The Web Connection Administrator
password has a 0-character minimum
and an 16-character maximum. For
details of the Web Connection admin-
istrator password, refer to the [Refer-
ence Guide] on the Documentation
CD/DVD.
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Use approved media. See "Specifica-
tions" on page 4-2.
13-29