U
W
SING
INDOWS
The Printer Is Not Printing
Cause
Incorrect IP address.
If LPD spool is set to
[On], the print data
sent by the user in a
single print instruction
has exceeded the
remaining storage
capacity of the desti-
nation device.
An irrecoverable error
has occurred during
printing.
The data format of the
print data to be proc-
essed by the printer
and that sent by the
computer are different.
NT 4.0/2000/XP/S
Verification
Ask the network admin-
istrator to check that the
IP address is correct.
Check the remaining
storage capacity of the
destination device.
Check the error message
on the printer control
panel.
-
B6500 Network Guide> 52
2003
ERVER
Action
Set up the correct IP
address for the printer.
1. If single print data has
exceeded the storage
capacity of the destina-
tion device, free space
on the device, or split
the file into smaller ones
to keep them below the
remaining storage space.
2. If multiple files have
exceeded the storage of
the destination device,
reduce the number of
files which can be sent at
a time.
Switch off the printer,
then switch it on again.
Disable the output func-
tion of Ctrl-D.