C Option Lpr Command; Function; Selecting A Paper Tray - Oki B6500 Network Manual

-C O (
PTION LPR
This section explains the functions which can be specified and
printing operations which will be affected by the -C option.
The -C option is available only when the SunOS directs the printer
to enter the spool mode.
Important:
• When the PostScript logical printer that was configured on
the printer web page and -C option of "lpr" command have
been specified simultaneously, some of the actions cannot be
guaranteed to work. Also, when specifying the PostScript
logical printer as a default printer on Unix, it is recommended
not to user the -C option by "lpr" command.
F
UNCTION
The following items can be set up by using the -C option:
NOTE
Any parameter other than below becomes invalid if specified.

Selecting a Paper Tray

When selecting a paper tray, either the paper size or the tray itself
is specified. If the paper size is specified, the printer automatically
searches and selects the tray where the specified paper is loaded.
The following parameters can be specified:
PARAMETER
INTRAY1/intrayl
INTRAY2/intray2
INTRAY3/intray3
INTRAY4/intray4
A4/a4
B5/b5
A5/a5
LETTER letter
LEGAL/legal
C )
OMMAND
DESCRIPTION
Selects Tray 1.
Selects Tray 2.
Selects Tray 3 (option).
Selects Tray 4 (option).
Selects the tray where A4 paper is loaded.
Selects the tray where B5 paper is loaded.
Selects the tray where A5 paper is loaded.
Selects the letter size.
Selects the legal size (8.5 x 14).
B6500 Network Guide> 36