Setting The Start/End Points Of The Audio (Multi Track Recording File) - Yamaha Tyros4 Reference Manual

5
Record the specific part of the audio song using the one of the
methods below.
Manual
Press the AUDIO RECORDER/PLAYER [REC] button and press the [PLAY/
PAUSE] button to engage the record mode, then press the [REC] and [PLAY/
PAUSE] buttons simultaneously to actually record. To stop recording, press the
AUDIO RECORDER/PLAYER [STOP] button. Pressing the AUDIO
RECORDER/PLAYER [PLAY/PAUSE] button during recording pauses the
recording.
Pedal
Press the AUDIO RECORDER/PLAYER [REC] button and press the [PLAY/
PAUSE] button to engage the record mode, then press and hold the footswitch.
The point at which you press the footswitch is the punch in point and the point at
which you release the pedal is the punch out point.
Auto
Press the AUDIO RECORDER/PLAYER [REC] button and press the [PLAY/
PAUSE] button. Recording automatically starts and stops at the specified point in
"Specifying the recording range in AUTO mode" on
playback automatically stops four seconds after the punch out point.
6
To hear your new recording, press the [PLAY/PAUSE] button.
If you've made a mistake or you're not completely satisfied with your perfor-
mance, press the [EXIT] button to return to the Multi Track Recorder display then
undo the Punch In/Out operation by pressing the [G] (UNDO) button.

Setting the Start/End Points of the Audio (Multi Track Recording File)

This function lets you set the Start and End points for the audio file. This action is non-destructive and affects only the
playback of the data; it does not actually delete any data from the start or end of the file.
1
Execute Step 1–2 in "Editing the Recorded Data (Multi Track
Recording File)" on
2
Press the [C] (START/END POINT) button.
3
Specify the Start/End point.
The operation of specifying the Start/End points is same as specifying the punch
in/out points. For instructions, see "Specifying the recording range in AUTO
mode" on page
4
Press the [F] (OK) button to enter the new settings to the file.
To cancel the operation, press the [G] (CANCEL) button.
92
Tyros4 Reference Manual
page 87 to select the desired audio data.
91.
page 91. The audio song
NOTE
The playback sound of the other (not re-
recorded) track is not recorded.
NOTICE
The data is automatically saved in
the internal HDD, but you want to
backup your data before re-
recording. Copying is the easiest
way to do this. However, since
copying within a folder in the HDD
is not possible, you need to cre-
ate a new folder. For details on
file management, refer to the
Owner's Manual.