Mfc10 Settings - Yamaha Tyros4 Reference Manual

MFC10 Settings

The explanations here apply to the MFC10 Page in step 4 on
By connecting an optional MFC10 MIDI Foot Controller to the Tyros4, you can conveniently control a wide range of
operations and functions by using your feet—perfect for changing settings and controlling the sound while you perform
live. Different functions can be assigned to each of the footswitches and up to five foot controllers (optional) can be con-
nected to the MFC10, for additional sound-shaping possibilities.
1
Connect the MIDI IN terminal of the MFC10 to one of the MIDI
OUT terminals of the Tyros4 by using a MIDI cable.
2
Set the MFC10 to the normal mode and turn the [FUNCTION]
lamp of the MFC10 on.
3
Perform steps 1–4 on
4
Set the parameters on this display as desired.
4-1
On this display, two settings (below) can be made:
• Each footswitch (F00–F29) on the MFC10 sends a note number to the Tyros4,
and the Tyros4 determines how it responds to (which function is executed by)
that note number.
• Each foot controller on the MFC10 sends control change messages over a spe-
cific control change number to the Tyros4, and the Tyros4 determines how it
responds to (which parameter is changed by) that control change number.
4-1
Use the [A]/[E] buttons to select "FOOTSWITCH" or "FOOT CONTROL-
LER."
NEXT PAGE
130
Tyros4 Reference Manual
MFC10
MIDI IN
If desired, connect
additional foot control-
lers to the MFC10.
page 124 to call up the MFC10 Page.
4-2 4-3
page 124.
MIDI OUT
4-5
4-6
5
4-4