Multi Track Recording - Yamaha PortaTone PSR-540 Owner's Manual

Song Recording

Multi Track Recording

1 3
-
Use the same operation as in "Quick Recording" (page
80).
4
Press the [NEXT] button to display the Song selection
screen.
5
Press the [NEXT] button again to display the RecMode
screen.
6
Select "MultiRec".
Use the data dial, the [+/YES] button or the [-/NO] button.
7
Press the [NEXT] button three times to display the PART
setting screen.
8
Select the desired track and part for recording.
1) Select a track.
Press one of the [TRACK1]-[TRACK16] buttons.
2) Select a part.
Use the data dial, the
[+/YES] button or the
[-/NO] button.
3) Set the desired track to
"Rec".
Press the [NEXT] button
and use the data dial, the
[+/YES] button or the
[-/NO] button .
• Make all necessary settings to each track by repeating steps 1) through 3)
above.
82
001 New Song
RecMode=MultiRec
RecPart T01 =R1
RecPart T16 =Rhm
CHORD
119
6
dim
513 START/STOP
7 augsus4
mM
[BACK] button
RecMode T16 =Rec
CHORD
119
6
dim
513 START/STOP
7
mM augsus4
BACK NEXT TRACK(1~16) 0 ~ 9
EASY
NAVIGATOR
KEYBOARD PART DIAL /YES
[NEXT] button
0 ~ 9
BACK NEXT TRACK(1~16)
EASY
NAVIGATOR
KEYBOARD PART DIAL /YES
• For information on the punch
in and start measure
functions (page 84).
• For information on track
assignments (page 79).
• To record auto accompani-
ment data, set the [ACMP]
button to ON.
• The same part cannot be set
to more than one track for
recording.