Yamaha Tyros4 Reference Manual page 72

3 MIX
This function lets you mix the data of two channels and place the results in a dif-
ferent channel. It also lets you copy the data from one channel to another.
[2 ]/
[3 ]
[4 ]/
[5 ]
[6 ]/
[7 ]
4 CHANNEL TRANSPOSE
This allows you to transpose the recorded data of individual channels up or down
by a maximum of two octaves in semitone increments.
[F]
[G]
5 SETUP
The current settings of the Mixing Console display and other panel settings can be
recorded to the top position of the Song as the Setup data. The Mixing Console
and panel settings recorded here are automatically recalled when the Song starts.
[1 ]–
[7 ]
[8 ]
[8 ]
72
Tyros4 Reference Manual
SOURCE 1 Determines the MIDI channel (1–16) to be mixed. All MIDI events of the channel
specified here are copied to the destination channel.
SOURCE 2 Determines the MIDI channel (1–16) to be mixed. Only note events of the channel
specified here are copied to the destination channel. Besides the values 1–16, there is
a "COPY" setting that allows you to copy the data from Source 1 to the destination
channel.
DESTINATION Determines the channel into which the mix or copy results will be placed.
CH 1–8/CH 9–16 Toggles between the two channel displays: Channels 1–8, and Channels 9–16.
ALL CH To simultaneously set all channels to the same value, adjust the Channel Transpose for
one of the channels while holding down this button.
SELECT Determines which playback features and functions will be automatically called up
along with the selected Song. The items selected here can be recorded only to the top
position of the Song, except for the KEYBOARD VOICE.
SONG: Records the tempo setting and all settings made from the Mixing Console.
KEYBOARD VOICE: Records the panel settings, including the Voice selection of
the keyboard parts (RIGHT 1, 2, 3, and LEFT) and their on/off status. Panel set-
tings recorded here are same as the ones memorized to the One Touch Setting.
This can be recorded at any point in a Song.
SCORE SETTING: Records the settings in the Score display.
GUIDE SETTING: Records the settings of the Guide functions including the Guide
ON/OFF setting.
LYRICS SETTING: Records the settings in the Lyrics display.
VH/MIC: Records the Vocal Harmony and the microphone settings in the Mixing
Console display.
MARK ON Add or remove a checkmark to the selected item. Checked items are recorded to the
Song.
MARK OFF
NOTE
Make sure not to transpose channels 9
and 10. In general, Drum kits are
assigned to these channels. If you
transpose the channels of Drum kits, the
instruments assigned to each key will
be changed.
NOTE
Before executing the Setup operation,
move the Song position to the top of the
Song by pressing the SONG [STOP]
button.