Yamaha Tyros4 Reference Manual page 21

3
Press the [G] (CUSTOM VOICE ASSEMBLY) button to call up the
Assembly display.
4
Use the [A]–[D] and [F]–[I] buttons to select the desired Ele-
ment to which Wave file(s) will be assigned.
The Key Mapping display of the selected Element will appear.
5
Assign the desired Wave to the selected Element.
5-1
Press the [F] button to call up the Add Wave display.
5-2
Press the [F] button to call up the Select Wave display.
5-3
Use the [F] button to select the category which contains the desired Wave
file.
For information on category, refer to
5-4 Select the desired Wave file by using the [1 ]–[5 ] buttons, then
press the [ENTER] button to confirm your selection.
NEXT PAGE
page 19.
NOTE
You cannot assign Waves to preset Ele-
ments (instrument icon is shown).
Tyros4 Reference Manual
1
21