Loading A Library (Expansion Voice Bank) To The Tyros4-Library Load - Yamaha Tyros4 Reference Manual

Loading a Library (Expansion Voice Bank) to the Tyros4—Library Load
This operation lets you recall the Custom Voices you've saved to a Library file (in Library Save on
them to the Tyros4.
1
Call up the operation display.
[VOICE CREATOR]  [A] LIBRARY LOAD
2
Use the TAB [][] buttons to select the location or device
containing the desired Library file.
3
By using the [A]–[J] buttons, select the desired Library file.
If the instrument does not contain Library files, the selected file is automatically
loaded. If the instrument contains Library files, a message appears prompting you
to overwrite existing Voices.
YES
YES ALL
NO
CANCEL
After the loading is finished, you can select the newly loaded Voices from the
[EXPANSION] button.
32
Tyros4 Reference Manual
The current Custom Voice displayed in the prompt is replaced with the one in the Library file.
Current Custom Voices are replaced with all of the Voices in the Library file. You can use this after
replacing some selected Voices one by one by using "YES" and replace all the rest.
The displayed Voice in the prompt will not be replaced.
Cancels loading the Library file.
page 30), and load
NOTE
File loading may take several minutes,
depending on how many Voices are in
the Library and how much data they
contain. Do not turn off the power or
disconnect any devices during this
operation.