Ales Nr Pens; Selecting A Voice - Yamaha PortaSound PSS-590 Owner's Manual

a. Selecting a Voice
There are 100 different pre-set voices to choose from,
providing a wide variety of sounds to accomodate many
types of song styles.
Step 1: Turn the POWER ON.
POWER MASTER VOL
Step 2: Press the VOICE button.
Press the VOICE button of STYLE/VOICE select.
(ES
UD sm 'voice _
Step 3: Select a Voice.
Consult the Voice List on the Control Panel and enter the 2
digit number using the buttons <0> thru <9> of the STYLE/
VOICE select. For example, if you want ELECTRIC
PIANO 1, which is Voice number 01, you first press «0»,
then <1>. You can increase or decrease the number
selected by using the increment <+>/decrement <->
buttons, so if you wanted to change the Voice to
ELECTRIC PIANO 2, which is Voice number 02, you can
just press the <+> button once.
Note: By pressing and holding the <+> / <-> Buttons you |
will increase or decrease the number at an accelerated
rate.
Step 4: Now when you press the keys of the keyboard,
you will hear the Voice selected in Step 3 above. If you
wish to change your Voice selection, just repeat Steps 2 &
3. (Unless you have been pressed the STYLE button, skip
Step 2.)
$
* The PSS-590 allows you to play up to 28 notes simultaneously. (But
this number does vary depending on the mode of Auto
Accompaniment, Orchestration, Voice, or playback status of Song
Memory. )
* If there is a shortage of notes that can be sounded at a time, the
following indication will be shown until the total amount of notes is
reduced under 28:
Ch Umi
Li! Hi
i
Fun et sl
CL
STYLE Lon AUTO ACCOMP BEAT