Enterasys Matrix 6H352-25 Installation Manual page 40

Using LANVIEW
Table 4-1 LANVIEW LEDs (Continued)
LED Color
TX Off
(Transmit)
Green
Amber
Red
4-4 Troubleshooting
State
Port enabled, and no
activity.
Should flash green every
two seconds indicating
BPDUs being sent if STA
is enabled and there is a
valid link.
Flashing. Indicates
activity. Rate indicates
data rate.
Blinking. Port in
standby.
Port may be disabled due
to Spanning Tree.
Flashing. Indicates
collision rate.
Solid. Diagnostic failure.
Recommended Action
1. Ensure that the STA is enabled and that
there is a valid link.
2. Contact Enterasys Networks for technical
support.
None.
1. Ensure that the port is not disabled.
2. Contact Enterasys Networks for technical
support.
None, unless there is a high amount of
activity. In this case, check for network
configuration problems or a defective
device.
Contact Enterasys Networks for technical
support.