Table of Contents
Advertisement
This chapter provides information concerning the following:
•
Using LANVIEW
•
Troubleshooting Checklist
•
Using the RESET Button
4.1
USING LANVIEW
The 6H352-25 uses Enterasys Networks' built-in visual diagnostic and status monitoring system
called LANVIEW. The LANVIEW LEDs
status to aid in diagnosing network problems.
Viewing Receive and Transmit Activity
Only one group of segments may be viewed at a time.
To view the receive and transmit activity on a group of segments, press the GROUP SELECT
button (see
Figure
4-1) to step to the group of interest (Group 1 or 2). Each time the GROUP
SELECT button is pressed, the GROUP LED lights up in sequence, indicating which Group is
selected. The receive and transmit activity for that group of segments is then indicated by the RX
and TX LEDs for each segment.
(Section
4.1)
(Section
4.2)
(Section
4.3)
(Figure
4-1) allow quick observation of the network
Troubleshooting
Troubleshooting
4
4-1
Advertisement
Table of Contents
Troubleshooting
