Hydrostatic Ground Drive System - Exmark LAZER Z X-SERIES Operator's Manual

Lazer z x-series

Hide thumbs

Table Of Contents

Table of Contents

– Moving motion control levers outward (in

slots) locks the drive system in neutral.

• PTO Engagement Switch: Engages electric clutch

(to drive belt) which engages mower blades.

• Parking Brake Lever: Engages/Disengages

parking brake.

• Deck Height Adjustment Lever: Sets cutting

height to desired position.

• Deck Lift Pedal: Foot pedal that lifts deck.

• Transport Lock:

–

Latching position: Automatically latches at

the transport position.

– Unlatching position: Deck does not latch at

the transport position.

Seat

• Type:

– For all units except LZX801KA606SS,

LZX940KC606, LZX940KC726,

LZX980KC606, LZX980KC726: Standard

seat with high back, extra wide foam padded

seat cushion with internal suspension, thick

bolstering, two-tone cover, armrests, integral

safety switch, and seat vibration isolation

system.

Optional seat accessories for units with

standard seats:

◊ Custom ride suspension system to enhance

Standard Seat. Adds approximately 3

inches (7.6 cm) to seat height.

◊ Deluxe suspension (adjustable spring

suspension) seat with high back, armrests,

and integral safety switch. Seat height

remains the same.

– For LZX801KA606SS, LZX940KC606,

LZX940KC726, LZX980KC606,

LZX980KC726:

Deluxe suspension (adjustable spring

suspension) seat with high back, armrests, and

integral safety switch. Seat height remains the

same.

• Mounting: Hinged seat frame to tilt up seat. Held

in tilted position with prop rod. Adjustable fore

and aft on seat tracks.

• Armrests:

– Standard seat: foam padded adjustable flip-up

armrests.

– Suspension seat: molded adjustable flip-up

armrests.

• Seat Safety Switch:

Integrated seat switch. Time delay seat switch

eliminates rough ground cut-outs.