Cooling System; Operator Controls; Seat; Hydrostatic Ground Drive System - Exmark Laser Z XS Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
2.4.7

2.5 COOLING SYSTEM

2.5.1
2.5.2
2.5.3

2.6 OPERATOR CONTROLS

2.6.1
2.6.2
2.6.3
2.6.4
2.6.5

2.7 SEAT

2.7.1
2.7.2
2.7.3
2.7.4

2.8 HYDROSTATIC GROUND DRIVE SYSTEM

2.8.1
2.8.2
2.8.3
2.8.4
2.8.5
2.8.6
2.8.7
Safety Interlock System:
PTO must be disengaged, brake engaged, and motion control levers out
(neutral lock) to start engine. (It is not necessary for the operator to be in the
seat to start the engine.)
Operator must be in seat when PTO is engaged, brake is disengaged, or
motion control levers are moved in or engine will stop.
Engine will stop if either the left, the right, or both levers are moved from neutral
lock position while brake is engaged.
Fan: Electric with continuous operation with engine running.
Coolant Liquid: 50/50 mix of DexCool© extended life antifreeze and water.
Coolant Capacity: 4 quarts
Steering and Motion Control:
Separate levers, on each side of the console, control speed and direction of
travel of the respective drive wheels.
Steering is controlled by varying the position of the levers relative to each other.
Moving motion control levers outward (in slots) locks the drive system in neutral.
NOTE: Motion control levers are adjustable to two heights.
PTO Engagement Switch: Engages electric clutch (to drive belt) which engages
mower blades.
Parking Brake Lever: Engages parking brake.
Deck Height Adjustment Lever: Sets cutting height to desired position.
Deck Lift Assist Lever: Foot pedal that assists in raising the deck.
Type: Deluxe suspension seat high back, low profile foam-in-place cushion
(dampened, adjustable spring suspension) and armrests, adjustable back angle.
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with scissor-type links. Adjustable fore and aft seat
track.
Armrests: Molded adjustable flip-up armrests.
Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.
Hydrostatic Pumps: Two Hydro Gear PW variable displacement piston pumps.
Wheel Motors: Two Parker/Ross with 1 1/4" tapered shafts.
Hydraulic Oil Type: Use Mobile 1 15W-50 Synthetic motor oil.
Hydraulic Oil Capacity: 5.5 qt. (5.2 L.)
Hydraulic Filter: Replaceable cartridge type.
P/N 103-2146: 25 microns, No bypass
Speeds: 0-12.0 mph (19.3 km/hr) forward
0-8.0 mph (12.9 km/hr) reverse
Drive wheel release valves allow machine to be moved when engine is not running.
www.mymowerparts.com
- 12 -