Seat; Hydrostatic Ground Drive System; Tires & Wheels; Cutting Deck - Exmark Lazer Z XS Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

2.6 SEAT

2.6.1
2.6.2
2.6.3
2.6.4

2.7 HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1
2.7.2
2.7.3
2.7.4
2.7.5
2.7.6
2.7.7
2.8 TIRES

2.9 CUTTING DECK

2.9.1
2.9.2
2.9.3
2.9.4
2.9.5
2.9.6
2.9.7
2.9.8
Type: Deluxe suspension seat high back, low profile foam-in-place cushion
(dampened, adjustable spring suspension) and armrests, adjustable back angle.
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with scissor-type links.. Adjustable fore and aft
seat track.
Armrests: Molded adjustable flip-up armrests.
Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.
Hydrostatic Pumps: Two Hydro Gear PW variable displacement piston pumps.
Wheel Motors: Two Parker/Ross with 1 1/4" tapered shafts.
Hydraulic Oil Type: Synthetic Mobil 1 15W-50.
Hydraulic Oil Capacity: 5.5 qt. (5.2 L.)
Hydraulic Filter: Replaceable cartridge type.
P/N 103-2146: 25 microns, No bypass
Speeds: 0-12.0 mph (19.3 km/hr) forward.
0-8.0 mph (12.9 km/hr) reverse.
Drive wheel release valves allow machine to be moved when engine is not running.
Drive
Pneumatic (Air-Filled)
Quantity
Tread "Multi- Trac C/S"
Size 26 x 12.00-12
Ply Rating
Pressure 10 psi (90 kPa)
Cutting Width: 60 in. (152.4 cm)
72 in. (182.9 cm)
Discharge: Side
Blade Size: (3 ea.) 60" Deck: 20.5 in. (52.1 cm)
72" Deck: 24.5 in. (62.2 cm)
Blade Spindles: Solid steel spindles with 1" I.D. bearings.
Deck Drive: Electric clutch mounted on horizontal engine shaft. "B" Section belt
(with self-tensioning idler) from electric clutch to transfer shaft mounted on deck.
Blades are driven by one "B" Section belt (w/self-tensioning idler) from transfer
shaft on deck to blade spindles.
Deck: Full floating deck is attached to out-front support frame. Six anti-scalp
rollers provide maximum turf protection. Deck design allows for bagging, mulching
or side discharge.
Deck Depth: 60" Deck: 5.5" (14.0 cm)
72" Deck: 5.5" (14.0 cm)
Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1 1/2" (3.8 cm) to 5" (10.2 cm.) in 1/4"(.64 cm) increments.
The cutting height adjustment handle has a transport position and all
adjustments can be made while the operator remains seated. Units also have a
foot operated deck lift assist lever to aid in raising the deck.
Mulching Kit: Optional.
www.mymowerparts.com
Front Caster
Semi-Pneumatic
2
Smooth
13 x 6.50-6
4
- 12 -
2