Etsysvpnipsecproposal Table; Etsysvpnipsecproptransforms Table; Etsysvpnahtransform Table - Enterasys Security Router X-PeditionTM User Manual

VPN MIB Tables

etsysVpnIpsecProposal Table

This table contains the IPSec proposals. The table index is {etsysVpnIpsecPropName}.
Table B-37 etsysVpnIpsecProposalTable
Field
etsysVpnIpsecPropName
etsysVpnIpsecPropMaxLifetimeSec
etsysVpnIpsecPropMaxLifetimeKB
etsysVpnIpsecPropUsePfs
etsysVpnIpsecPropGroupId
etsysVpnIpsecPropRowStatus

etsysVpnIpsecPropTransforms Table

This table aggregates transforms from the ipspAhTransformTable, ipspEspTransformTable, and
ipspIpcompTransformTable into transform sets. The table index is {etsysVpnIpsecPropName,
etsysVpnIpsecPropTranType}. The table also contains read-only rows for XSR EZ-IPSec transforms.
Table B-38 etsysVpnIpsecPropTransformsTable
Field
etsysVpnIpsecPropTranType
etsysVpnIpsecPropTranName
etsysVpnIpsecPropTranRowStatus

etsysVpnAhTransform Table

This table lists all the AH transforms created by adding AH rows to the
etsysVpnIpsecPropTransformsTable. The table also contains read-only rows for XSR EZ-IPSec
transforms. The table index is {etsysVpnAhTranName}.
Table B-39 etsysVpnAhTransformTable
Field
etsysVpnAhTranName
etsysVpnAhTranAlgorithm
etsysVpnAhTranMaxLifetimeSec
B-16 XSR SNMP Proprietary and Associated Standard MIBs
Description
The name of an IPSec proposal.
Acceptable values are 300-8640000 seconds with a default of
28800. When used to create a row, all other values are defaulted.
Since the CLI does not allow this to be set, the XSR implements this
as read-only.
Acceptable values are active(1), createAndGo(4) and destroy(6).
When used to create a row, all values are defaulted.
Description
Acceptable values: protoIpsecAh(2) and protoIpsecEsp(3). Since the
XSR does not support software compression, protoIpcomp(4) is
unavailable.
A transform name. This object must be used to create the row. The
corresponding row in the AH or ESP transform table will be created
when this row is created. The transform will have default values.
Acceptable values: active(1) and destroy(6). This object cannot be
used to create a row since the transform name is needed first.
Description
The name of an AH transform.
Acceptable values: hmacMd5(1) and hmacSha(2). This value can be
set after the row is created via the creation of a row in the
etsysVpnIpsecPropTransformsTable.
This is read-only for the XSR since etsysIpsecPropLifetimeSec is used
as a common setting for the proposal.