Etsyssrvclvlownertable; Etsyssrvclvlhistorytable - Enterasys Security Router X-PeditionTM User Manual

Service Level Reporting MIB Tables
Table B-10 etsysSrvcLvlMetricTable
etsysSrvcLvlMetric Description
RoundTripPacketLost
RoundTripPacketLossAverage
RoundTripDelay
RoundTripDelayAverage
RoundTripIpdv

etsysSrvcLvlOwnerTable

A management entity interested in creating and activating remote SLA measurements must
previously be registered in the Service Level Owners Table which contains owner's contact
information. The MIB indicates that there should be at least one owner monitor in the
etsysSrvcLvlOwnerTable. So, by default, the table comprises one row. Unless you specify the quota,
IP address, Email or SMS, the default monitor entry will not be stored in the startup-config file. All
other entries will be stored in the startup-config, though.
Data in this table can be configured via SNMP as well as the
an owner entry by setting the status field of the new entry to CreateAndWait. You can modify the
parameters and even the row becomes active. But, once there is an rtr entry which binds to a
particular owner, you cannot change the parameter for the bounded owner. Also, you cannot
remove the owner monitor nor add the same owner twice. The status of the owner monitor is
always active and cannot be changed.
Table B-11 etsysSrvcLvlOwnerTable
Field
etsysSrvcLvlOwnersOwner
etsysSrvcLvlOwnersGrantedMetrics
etsysSrvcLvlOwnersQuota
etsysSrvcLvlOwnersIpAddressType
etsysSrvcLvlOwnersIpAddress
etsysSrvcLvlOwnersEmail
etsysSrvcLvlOwnersSMS
etsysSrvcLvlOwnersStatus

etsysSrvcLvlHistoryTable

This table contains measurements of Service Level History entries. It is not SNMP-configurable and
the total size allocated per owner is set but can be configured via the CLI
use the
Table B-12 etsysSrvcLvlHistoryTable
Field
etsysSrvcLvlHistorySequence
B-2 XSR SNMP Proprietary and Associated Standard MIBs
show rtr history command to view data in this table.
etsysSrvcLvlMetricType
Network
Aggregate
Network
Aggregate
Aggregate
rtr owner
Description
monitor
Read only
700
Ipv4 (1)
1234567 (phone number must not contain space)
active
Example Value
1
CLI command. You create
rtr command. You can