11. Locate the right and left side spacers, the six (6)
1/4-20 x 1/2 truss head bolts, Iockwashers,
and
hex nuts. Position the spacer inside the right and
left side panels and fasten in the three holes as
illustrated.
Hand tighten nuts.
12. Locate the two (2) covers and attach to openings
in the right and left side panels as illustrated.
SPACER
/
©
I/4-20
x 1/2
_D
\
SIDE PANEL
COVER
/
E_
¢D---
uo,_:
CHECKING
CABINET
FOR SQUARENESS
TOOLS
NEEDED:
Framing
square, 3/4" wrench
and 7/16" wrench or socket.
1. With cabinet
on back side place a square
on
lower shelf next to right side panel. Adjust stand
so both right side panel and lower shelf touch
square (as illustrated).
Then tighten nut holding
rear of shelf to side panel and right side spacer to
front of lower shelf. Repeat procedure
for left
side.
2. Place square at top side of cabinet
and adjust
stand
so square
touches
both skirt
and side
panel (as illustrated).
Then tighten right side of
front and rear skirts to side panel. Repeat pro-
cedure for left side.
13