Advertisement
Available languages
Available languages
Unit Operation (Fig. 13)
-- In the event that the remote
control is not working or has been misplaced, the unit wilt
operate as follows:
40BN018,024,030
Units always operate by the remote
control. If you lose or break the remote, the unit wilt continue
to operate but settings cannot be changed until you get a new
relnote control.
To Turn Unit Off
Push the Operation Push Button located
under the fiont cover. See Item I, Fig. 13. The AISI'O/OFF
indicator light wilt go off
To Turn Unit On
Push the Auto/Off button located under
the tiont cover. See Item I, Fig. 13. The AUTO/OFF indicator
light will light. The unit will operate at the settings that have
been pro malrnned using the remote control.
40BN036
Unit will operate according to predetermined
factory settings.
To Turn Unit Off
Slide the Operation Switch on the unit
(Item I, Fig. 13) to the OFF position.
To Turn Unit On
Slide the Operation Switch on the unit
(Item I, Fig. 13) to the AUTO position. The unit wilt operate at
a temperature setting of 74 F and will autolnaticalty select the
required operation mode and tan speed to maintain this setting.
40BN018,024,030
40BN036
Q FILTER RESET
G
E
C
D
A
B
AUTO
OFF
REMOTE
O,
(9
©
U,
FEATURE
DESCRIPTION
A
Infrared Receiver
Receives transmissions
from the remote controller.
B
FILTER Indicator Light
Lights when the air filters require cleaning.
C
(ON)/(AIR COND Indicator Light
Lights when the air conditioner operates. Flashes when defrosting.
D
TIMER Indicator Light
Lights when a TIMER Start or Stop time is set.
E
POWER Indicator Light
Lights when the air conditioner
is connected to the electricity supply of the proper
line voltage.
G
SERVICE Indicator Light
Lights or flashes accordingly
to the malfunction.
(See further information
on
page 11 ).
Operation Push Button
Turns the air conditioner ON (Auto) Mode and OFF without Remote Control.
40BN018,024,030)
_ Resets unit after malfunctions
and resets the Filter indicator light. (Press the but-
ton continuously
for 5 seconds.)
I
Operation Slide Switch
Turns the air conditioner ON (Auto) Mode and OFF without Remote Control.
(40BN036)
_ Resets unit after malfunctions and resets the Filter indicator light. (Slide Operation
Switch to OFF position for 5 seconds and then return the switch to remote.)
• Operates the air conditioner
using the remote controller when the operation switch
is in REMOTE position.
Fig. 13 -- Indoor Unit Display Panel Features
Advertisement
