Setting The Oven; For Delayed Baking - Amana ARR629 Use & Care Manual

SETTING THE CONTROLS
BAKING / ROASTING
TO USE
1. Press the Bake Temp button.
.
.
BAKE
and o will light in the display.
Turn the Temp. Set knob to adjust the
temperature.
The oven will begin cooking in 3 sec-
onds and ON will light in the display.
ture display will drop to 100 °. As the oven
heats the temperature will rise on the display
until it reaches the set temperature. If you
want to adjust the oven temperature while
you are cooking, Press the Bake Temp but-
ton and adjust the temperature using the
Temp Set knob.
WHEN FINISHED:
1. Press the Cancel button.
WHAT TO EXPECT:
When the oven begins to heat the tempera-
..... [ "D" -IN 950° J .............
_O L. "_DU,=, _ 0
O 0 0 0 0 0 •
NIR_ _o_ S_p co_ €le_. aro_ _o_
TINt rime rlm, _
SETTING THE OVEN FOR DELAYED BAKING
1. Press the Cook Time button. OVEN
and TIME will light in the display.
2. Turn the Time Set knob untilthedesired
amount of cooking time is displayed.
3. Press the Stop Time button. STOP TIME
and the earliest possible stopping time
will light in the display.
4. Turn the Time Set knob to the time of
day you want the oven to stop. DELAY
OVEN will light in the display.
5. Press the Bake Temp button. BAKE will
light in the display.
6. Turn the Temp Set knob to adjust the
oven temperature. The temperature
can be adjusted from 170 ° to 550°E
7. The oven will begin cooking at the pre-
set time and ON will light in the display.
8. When the cycle is complete the oven
will "beep" until you Press-Cancel.
WHAT TO EXPECT:
The control will automatically calculate the
starting time based on the cooking and
stopping time. The oven will begin at the pre-
determined time. DELAY will disappear from
the display and ON will light in the display.
The temperature display will drop to 100 ° and
begin to rise with the oven temperature. The
oven will automatically stop cooking at the
pre-set time. When the oven is finished cook-
ing it will continue to "beep" until you press
the Set/Cancel button.
NOTE:
You can check any of the pre-set
times by pressing the
corresponding buttons, For
example, to check the stop time
Press the Stop Time button.
ca.cml
0
:
.2, s°° o
0 0
• •
0 0
•
Mid.t, cl_* stop c_** cl#n atoll sere
rlm,r Time r*_
lO